Anmol Chemicals is a mubygroup company involved in manufacturer of Oil & Gas Fracturing and Drilling chemicals, including flow diverting agents, Pharmaceutical Excipients, Food & Flavor chemicals. The group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa USA & china.
The units in the group have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal and DMF support is available.

Home ---------- Contact

CarboyBarrelsBags PalletBig BagDiverting Agent

DA-355 Easily Degradable Oil-Gas High Temperature Fracture Diverting Agent Manufacturers. Low Temperature Diverting Agent is also offered.


Fracture Diverting Agent
Fracking Diverting Agent
Diverting Agent

DESCRIPTION
DA-355 is a high molecular weight polymer designed to be used as a flow diverting agent for use in stimulation applications in oil and gas fractures. DA-355 can be used with acids, linear & cross linked gels and slick water for high temperature applications.

DA-355 is used for sealing perforations, existing fractures and natural fractures.  It can be used to protect producing zones during work-over operations.  It permits treatment of zones with porosity differences and separates the total treatment zone into stages. DA-355 diverting agent is offered in tight particle size distributions like 10/30, 30/70, 70/120 or mixtures thereof.  Larger sized particles permit bridging and smaller sized particles bridge across the larger particles, forming a low permeability zone.

DA-355 is extremely poorly soluble in water below 140°F or 60°C. At formation temperatures above 175 deg F, DA-355 will hydrolyze in to water and condensate soluble products.  Typical half life of DA-355 is 2 weeks at bottom hole conditions.

DA-355 will bridge perforations and slots as wide as 0.35 inches. Typical usage is between 10 to 20 lbs per perforation.

BENEFITS
Helps distribute treating fluids uniformly in the zone
Helps control gels to perform multiple fractures
Dissolves completely post treatment, leaving no residue behind
Can be used up to 355 deg F Bottom Hole Temperatures

TYPICAL PHYSICAL PROPERTIES - SPECIFICATIONS
Appearance: White Solid
Specific Gravity: ~1.25

PACKAGING
50 lb. bags; 1,000 lb. super sacks

COMPATIBILITY
DA-355 is compatible with all known frac fluids. A compatibility test is advised before use with anionic and amphoteric additives.

Both low temperature and High Temperature Flow Diverting Agents are offered.

Hydraulic Fracturing: Flow Diverting Agent Manufacturers

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

ISO 9000

Fracture Diverting Agent, Ferric Chloride Hexahydrate, Malic Acid, Skatole & Indole, Potassium Bicarbonate & Carbonate, Sodium Caprylate, Steartic Acid, Tartartric Acid

Exports to USA, Canada, Europe, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Malaysia, Indonesia, Thailand, Korea, Vietnam, Japan, etc. Check

Copyright and Usual Disclaimer is Applicable. Check.